Flight Simulation

Have you tried Logitech ones?
I have a driving sim setup at home and am looking for flight one since we getting close on next MS flight sim release (?).
Sad that it’s freaking hard to find thrust master ones in India.

2 Likes

I’ve used an inexpensive Logitech one in the past, but I found it to be kind of difficult to control the aircraft with it, so I abandoned it in favor of a yoke (CH Products flight yoke), which had its own problems and which I would not recommend.

The Thrustmaster joystick, on the other hand, is an absolute joy to use – extremely sensitive and precise, without any of the flakiness of my old joystick. I’m certain that the difference is due to the use of Hall effect sensors in the Thrustmaster.

There are loads of people using Logitech joysticks for flying, however, so if you can’t find the Thrustmaster, you should be fine with a Logitech.

Flew my first flight on PilotEdge this evening – great success! I flew a short 47 nm route between two non-towered airports (L52 and L88) in Southern California. Although visibility wasn’t great, it was still quite scenic, as it took me over part of the Santa Ynez mountains:

PilotEdge has a cool training program to help sim pilots become comfortable with the airspace, communications, and ATC procedures within the PE service area. (All of these mimic their real-world counterparts VERY closely, so the training can even help real world pilots who are looking to improve their skills for operating in the system!)

I earned my CAT-1 rating with this flight! I got to see my name appear on the PilotEdge home page twice: when I completed my flight and then again a few minutes later when my rating was awarded. :partying_face:

Yep, I’m hooked.

Also

I was a little nervous about making this flight, believe it or not! Sharp eyed observers may notice that I made a few mistakes (through not following my checklists :man_facepalming: – I left the landing and taxi lights on for the whole flight, and I forgot to activate my transponder before takeoff. Also, I am flying a bit to the left of my planned course, but I did get back on course a few minutes after I took this screenshot.

2 Likes

I love the DA62, but one thing that kind of bothers me about the various paint schemes included with the model is that the registration numbers don’t match the one I’m using when flying the sim. (Incidentally, I have actually reserved that registration number with the FAA, so it’s MINE! Muahahaha!)

I decided to try creating a new livery for the DA62, and it turns out that while tedious, it’s not too difficult to create a basic paint scheme. Here’s a quick look at my progress so far:

For comparison, this is the default scheme included with the aircraft model:

1 Like

Sightseeing in Ohio this afternoon! In the top image, I’ve just taken off from Clermont County Airport (I69), home of Eastern Cincinnati Aviation and the location of my very first flight lessons many years ago!

The scenery looks realistic because I’ve installed new scenery textures based on orthographic photos, which are overlaid on the terrain. (It makes things look SOOOO much better, plus it’s easier for a VFR pilot like me to find the airports! :laughing:) The upgraded scenery doesn’t affect frame rate, but it sure does consume disk space! (Over 400 GB for just California and the Mid-Atlantic states!!!)

1 Like

Over 400GB??? That’s a lot, I don’t know a video game can take that much disk space

That’s for this photorealistic scenery, which is entirely optional. :wink:

2 Likes

Some images from a couple of today’s flights through scenic Southern California. I keep meaning to take some screenshots on approach to the airport, but I get kind of busy with preparing for landing and I keep forgetting! (It’s exactly like flying in the real world in that respect!!!)

Also

Yes, that’s Ruby’s emblem on the tail :rwby_ruby:

1 Like


Showed my daughter the sim this morning, and we went for a quick flight around SoCal to the northwest of LA. The weather was gorgeous for sightseeing because I set it that way :wink:


Decided to take a sunset flight down to LA tonight. Here, I’m following the coast below Santa Barbara. The brightly light airport off the right wing, adjacent to the ocean, is Naval Air Station Point Mugu.


Just coming into the Los Angeles basin, with Santa Monica in front of me and the brilliant lights of LAX in the distance on the right. (The lighting in the sim is a little odd, as the airport is visible much farther away than the city.)


On final for Runway 6R at LAX. I’m a little to the left of the centerline, but worse, I’m above the glideslope, as indicated by the four white lights immediately to the left of the runway lights. (If I were on the proper glidepath, they would show two red and two white lights.) Of course, the runway is nearly 11,000 feet long, so getting on the ground wasn’t a problem – even though the landing was kind of awkward. :grimacing:

Found an entirely new thing to occupy my remaining spare time: creating virtual instruments for use with X-Plane! There’s an amazing piece of software called Air Manager from Sim Innovations that allows you to use image files and Lua scripts to recreate in software existing instruments or even fashion your own. The Air Manager software manages the connection to your flight simulator (it works not only with X-Plane but also with Flight Simulator X and Prepar3D), which doesn’t even have to be on the same machine as the Air Manager software.

This Cessna 172 panel was created entirely within Air Manager, and when the simulator is running, every instrument you see works exactly as the real one would:

Here’s a look at the Air Manager interface showing the built-in Lua code editor:

Here’s the bit that convinced me to buy the software ($70 US): you can use an Arduino to connect hardware such as switches and rotary encoders to replicate an instrument in hardware! As my goal is to eventually build a replica of a DA62 cockpit (I changed my original goal from a DA42 once I saw the DA62 cockpit!), I’ll need to be able to do this once I start building!

Dude this is the coolest thing ever. Just so you know.

1 Like

COCKPIT HARDWARE - Virtual Fly G1000



My desk got significantly more crowded this evening – FedEx finally got me the Christmas present I bought myself on Black Friday :innocent: The Virtual-Fly G1000 is a near-exact replica of the Garmin G1000 primary flight display, audio panel, and multifunction display, and it provides not only the more realistic experience of always having the flight instruments right in front of you but also helps to eliminate the decidedly unrealistic experience of having to use the mouse to push buttons and twiddle knobs in the cockpit.

Virtual-Fly sells a beautiful desktop stand for the system, and you can see how the displays are mounted in the 2nd picture above. The monitors are simply standard XVGA displays, and they’re connected via HDMI to my video card. The bezels – with all their knobs and buttons – connect via USB 2 to the PC.

Setup was a breeze, as X-Plane immediately recognized the system and mapped all the buttons to their proper functions. It took just a few minutes to get the built-in G1000 emulator set up to use the new displays, but once I did, you can see the result :point_down:



Wired up (not very neatly) a little prototype of the gear and flaps indicators on the DA62 panel to see if I could get them working with X-Plane … and after a little bit of coding in Air Manager, they work perfectly! (I even added the proper indication when the “Gear/Fire Test” button is pushed – that doesn’t work the way it should on the simulated instrument panel, and it has bothered me :rbgwen:)

Time to start collecting parts to build my panel …

For those interetsted here are the actual indicators in the real aircraft:
image

After a really busy week, I finally got a chance to do some flying today on my day off! I took a leisurely flight down the SoCal coast to sightsee and to practice with the Garmin autopilot. Beautiful weather today, though it was a little bumpy at times at the altitudes at which I was flying (3000-5000 ft MSL).

Were you flying in a simulation or real life?

In the sim :sunglasses:

Real life flying is coming soon … My New Year’s resolutions for 2020 are (1) get my medical, (2) get current again, and (3) get my instrument rating. A bonus would be getting my multi-engine rating as well.

These goals are hard to achieve, at least under my perspective , hope you all the best and I would love to see your real life flying pictures!

1 Like

Came across this really excellent ebook on the Apple Books Store. If you want to fly the DA62 (in real life or in a simulator such as X-Plane), this is $20 US well spent.

Flew from Scottsdale, AZ (KSDL) to Las Vegas (KLAS) this evening to try out a new bit of software (xVision) that tunes X-Plane’s shaders for more appealing visuals. Great flight, even with the default scenery! xVision does make everything look nicer, I think!

Btw, my landings are getting better*, but my approaches are still sloppy, mostly because I haven’t gotten good at figuring out when & how to change the views (to look out the side windows, for instance).

*Lies :point_down:


At least the DA62 floats. :grimacing:

Bruh, you actually managed to get me… I was like “Damn, Hazel out here doin some work”.

Until I read the next sentence…

Also I like your set up. It reminds me of my younger times when the Ps2 had a whole mock/controller wheel with gas peddles to control a car. :kraken_happy_t3:

2 Likes